EnglishEspañolPortuguese
Like !
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008

Home

Industrial Solutions

Resources

News and Events

SiteInfo

Contact
Inquiry List
CheckOut

By-Pass Chamber Level Indicators

 

LIX-30-C/D

Like !

MAGNETIC LEVEL INDICATOR + SWITCH + TRANSMITTER

This instrument is suitable to measure level in extreme conditions: pressures to 150 bar, temperatures to 400 °C and liquid densities from 0.48 gr/cm3.

Large selection of constructive options and multiple indication units (LEDs, Magnetic Follower, Rolling Flags)

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G (FM, CSA or equivalent)
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is NOT affected by the density of the liquid being measured.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

LIX-30-D

Like !

MAGNETIC LEVEL IDICATOR. Indication Unit Detail.

Two different options of LED electronic indication units: Expolsion-Proof and Intrinsic Safety.

And four mechanical: Magnetic Follower and Rolling Flags (with rails in PolyCarbonate, Aluminum or Stainless Steel)

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
 

LIX-30-F

Like !

MAGNETIC LEVEL INDICATOR. Float Detail.

More than fifty different float models to cover all possible process conditions.

Selection of constructive materials and anti-corrosive linings.

Add this product to the Inquiry List.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as: PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
All or parts of the primary unit ("wet" parts) of this instrument are available with special anti-corrosive linings in engineering polymers such as: PTFE, PVDF (Kynar), PFA, ETFE (Tefzel), ECTFE (Halar) or similar.
 

LIX-30-H

Like !

MAGNETIC LEVEL INDICATOR. HART UNIT.

Optionally all LIX-30 instruments can be supplied with transmission units with output 4...20 mA + HART and with backlit LCDs.

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G (FM, CSA or equivalent)
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

LIX-30-IS

Like !

MAGNETIC LEVEL INDICATOR. Intrinsic Safety Version.

The Intrinsic Safety LED indication unit not only is the perffect solution for classified areas, but also is very convenient when there are limitations with

the power supplies available in the field (ie.: with supply from RTUs or PLCs).

Add this product to the Inquiry List.
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Download the technical Data Sheet of this product.
 

LIX-30-P

Like !

MAGNETIC LEVEL INDICATOR. Plastic Version.

This version is specially suited to work with very corrossive liquids.

Available in many engineering plastics susch as: PVC, CPVC, PTFE, PFA, PP, etc.

Add this product to the Inquiry List.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as: PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

LIX-30-UGS

Like !

MAGNETIC LEVEL INDICATOR. Underground Storage Tank Version.

Version suitable for mounting in underground storage tanks or on the top of standard tanks.

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.