EnglishEspa˝olPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Turbine Flowmeters, In-Line & Insertion

 

SP-T

STANDARD AXIAL TURBINE FLOWMETER

Nominal sizes ranging between 1/4" and 4". Typical accuracy: 0.5% of reading.

Very wide temperature application range: -250 to +530 °C.

Add this product to the Inquiry List.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Certified by several Weights & Measures legal bodies with the purpose to be used in commercial transactions. (Custody transfer applications)
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This instrument is ideal to measure Cryogenic Liquids, such as liquid Nitrogen (LN2, approx. -196 °C), liquid Oxygen (LOX, approx. -183°C), liquid Argon (LAR, approx. -186°C) or similar.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SP-F

FLANGED AXIAL TURBINE FLOWMETER

Multiple sizes between 1/2" and 12". High accuracy.

Very versatile: batching, custody transfer, etc.

Add this product to the Inquiry List.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Certified by several Weights & Measures legal bodies with the purpose to be used in commercial transactions. (Custody transfer applications)
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SP-W

WAFER STYLE AXIAL TURBINE FLOWMETER

Available for pipes between 1/2" and 4". It is mounted between standard ANSI flanges.

Accurate and affordable solution.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This instrument is ideal to measure Cryogenic Liquids, such as liquid Nitrogen (LN2, approx. -196 °C), liquid Oxygen (LOX, approx. -183°C), liquid Argon (LAR, approx. -186°C) or similar.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SP-S

SANITARY AXIAL TURBINE FLOWMETER

Available with Tri-Clamp connection between 1/2" and 4". Accuracy: 0.5% of reading.

Suitable for liquids and gases in the food and pharmaceutical industries.

Add this product to the Inquiry List.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Certified by several Weights & Measures legal bodies with the purpose to be used in commercial transactions. (Custody transfer applications)
Certified by organizations such as 3A (USA), EHEDG (Europe) or equivalent in order to be used in sanitary or sterile processes.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable for sterile sanitary processes with "Sterilize in Place" procedures. This typically means service at T >= 120 °C for a minimum time of 30 minutes and in direct contact with steam or other chemicals.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SP-L

MICRO PADDLE WHEEL FLOWMETER

Special for very low liquid flowrates.

Twelve sizes to cover the range between 0.01 through 10 lts/min.

Add this product to the Inquiry List.
This instrument is suitable to measure low viscosity liquids (typically with viscosity <= 10 cPoise).
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
 

SP-I

INTEGRATED AXIAL TURBINE FLOWMETER

With local display for accumulated volume. Ideal for light fuels.

Only one size: 1" with flow range between 19 and 190 lts/min.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure low viscosity liquids (typically with viscosity <= 10 cPoise).
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SGN-P

PADDLE WHEEL FLOW SENSOR

Can measure liquid velocities between 0.1 and 6.0 m/sec. For pipes ranging from 1/2" to 36".

Made of plastic materials. Ideal solution for drinking water.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SGN-T

PADDLE WHEEL FLOW TRANSMITTER

Suitable for pipes ranging between 1/2" and 8". Made of engineering plastics.

Typical outputs: 4...20 mA or pulses.

Add this product to the Inquiry List.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SGN-M

INDUSTRIAL PADDLE WHEEL FLOWMETER

Can measure liquid velocities from 0.1 to 6.0 m/sec. Metallic construction.

Suitable for pipes from 1 1/2" to 24". Optionally with "hot tap" mounting.

Add this product to the Inquiry List.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
Insertion instrument suitable to be mounted in the process piping (with no service interruptions) by Hot Tap procedures.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-PWE

PADDLE WHEEL FLOW INDICATOR

Four sizes between 3/8" and 1", covering the flowrange from 0.15 to 132 Lts/min. With back-lit LCD.

Ideal as a simple replacement for laboratory rotameters.

Add this product to the Inquiry List.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
This instrument is suitable to measure low viscosity liquids (typically with viscosity <= 10 cPoise).
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the technical Data Sheet of this product.
 

A-PWM

PADDLE WHEEL FLOW SENSOR

Same as above, but only with pulse output.

This product is suitable for high volume applications.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
This instrument is suitable to measure low viscosity liquids (typically with viscosity <= 10 cPoise).
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.