EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

UltraSonic & Radar Level Transmitters

 

G-SLT5.

ULTRASONIC LEVEL TRANSMITTER

Typical accuracy: 0.25% FS. Measurement ranges between 10 and 30 m.

The instrument has transmission (4...20 mA) and control (relay contacts) outputs.

Add this product to the Inquiry List.
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
The sensing device or active parts of this instrument have direct no contact with the process fluid.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

G-DLT2

ULTRASONIC DIFFERENTIAL LEVEL TRANSMITTER

Specially designed to monitor barscreens and similar devices.

It can measure and transmitt upstream level, downstream level or the difference between both.

Add this product to the Inquiry List.
The sensing device or active parts of this instrument have direct no contact with the process fluid.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

G-PSL5

ULTRASONIC PUMPING STATION CONTROLLER

This instrument has six control outputs (relay contacts) that allow it to solve all applications in a pumping station.

Add this product to the Inquiry List.
This product is new and has been launched into the market or totally revamped less than one year ago.
The sensing device or active parts of this instrument have direct no contact with the process fluid.
This instrument is suitable to measure all kind of waste water. Including raw or partially filtered sewage.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

G-LIT2

LOW COST ULTRASONIC LEVEL TRANSMITTER

Simple and compact instrument. Can measure liquid level in tanks up to 10 m tall.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
The sensing device or active parts of this instrument have direct no contact with the process fluid.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

MRG-10

ANTENNA TYPE RADAR LEVEL TRANSMITTER

Works at 5.8 GHz. Four different antenna models to cover ranges up to 20 m.

Add this product to the Inquiry List.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
The sensing device or active parts of this instrument have direct no contact with the process fluid.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.