EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Vortex & Target Flowmeters

 

Ex-Delta-F

STANDARD VORTEX FLOWMETER

Ten different sizes between 1/2" and 12". Pressures up to 50 bar. Service temperature up to 460 °C.

Ideal solution for steam and gases (including Natural Gas).

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment with no moving parts.
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Ex-Delta-W

WAFER STYLE VORTEX FLOWMETER

Eight nominal sizes between 1/2" and 6".

Convenient solution: high accuracy and affordable.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Ex-Delta-B

BATTERY POWERED VORTEX FLOWMETER

Nominal sizes between 1/2" and 4". Wafer style.

Battery or 24 VDC loop power.

Add this product to the Inquiry List.
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the technical Data Sheet of this product.
 

Ex-Delta-I

INSERTION VORTEX FLOW METER

Ideal for large pipes: 8" through 80". Temperatures up to 300 °C.

High sensitivity: as low as 0.6 m/s in water.

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
Insertion instrument suitable to be mounted in the process piping (with no service interruptions) by Hot Tap procedures.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

Eg-Delta-T

COMPACT VORTEX FLOWMETER

Four nominal sizes betwen 3/8" and 1". Up to 80 °C and 10 bar.

In water can measure between 0.4 and 133 LPM. In air, covers ranges between 7 and 850 ALPM.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
 

Eg-Delta-S

COMPACT VORTEX SANITARY FLOWMETER

Same as above but with sanitary connections.

Available with ISO (TriClover) Clamp or unions Danish, SMS or DIN.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
 

Ultra-Egg

FLOWMETER FOR ULTRA-PURE FLUIDS

Integral construction in PVDF. Service conditions up to 80°C and 7 bar.

Available in two sizes: 1/2" and 3/4". (Range: 3 to 70 LPM of ultra pure water.)

Add this product to the Inquiry List.
This instrument is available with a combination of construction materials (for the primary and/or enclosure) that make it suitable for service or operation in environments with corrosive compundes, such as wet Cl2, HCl, NaOCl, etc.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the general catalog of this product line.
 

Eg-Pulse-T

LOW COST VORTEX FLOW SENSOR

Same as the Eg-Delta-T, but with pulse output only.

Ideal for high volume applications: very low cost.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Eg-Pulse-S

LOW COST SANITARY VORTEX FLOW SENSOR

Same as above but with sanitary connections.

Available with ISO (TriClover) Clamp or with unions Danish, SMS or DIN.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

NGR-FM

TARGET FLOW METER

Ideal for high pressure gases or liquids.

Flanged bodies between 1/2" and 6". Insertion styles between 4" and 36".

Add this product to the Inquiry List.
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.