EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Coriolis Mass Flowmeters

 

U-Mass

"U" TUBE MASS FLOW TRANSMITTER

Eight nominal sizes from 3/8" to 3", with mass flowranges between 4 kg/hr and 240 ton/hr.

Accuracy up to 0.10% of reading. Service temperatures up to -200 ... +200°C.

Add this product to the Inquiry List.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
This flowmeter may include an additional 4...20 mA output to be assigned as Density Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
 

V-Mass

SEMI-STRAIGHT TUBE MASS FLOW TRANSMITTER

Five nominal sizes covering between 1/2" to 2".

Mass flow ranges from 60 kg/hr up to 96 ton/hr.

Add this product to the Inquiry List.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

A-Mass

ADVANCED MASS FLOW TRANSMITTERS

Three alternatives: "U", Semi-Straight and Straight tubes. Accuracy to 0.10% of reading.

Twelve sizes between 1/4" and 6". Flow ranges from 2 gr/min up to 372 ton/hr.

Add this product to the Inquiry List.
This product is new and has been launched into the market or totally revamped less than one year ago.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
This flowmeter may include an additional 4...20 mA output to be assigned as Density Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.