EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Differential Pressure Flowmeters

 

F-FKC

DIFFERENTIAL PRESSURE TRANSMITTER

Ranges from 10 mm Water Column to 30 bar differential.

Multiple materials (AISI 316, Hastelloy C, Monel, Tantalum, etc.)

Add this product to the Inquiry List.
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is available with Safety Integrity Level Certification. Typically it will be SIL-2 or higher.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

F-FKW

HART HANDHELD COMMUNICATOR

Allows to access remotely all HART protocol transmitters.

Available with Intrinsic Safety Certification and with Printer.

Add this product to the Inquiry List.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

FEX-210

ORIFICE PLATE FLOW ELEMENT

Manufactured according to international standards (ISO, ISA, AGA, API, etc.)

Nominal Sizes between 1/2" and 36".

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
This product has one of the lowest total purchase prices, when compared with others within its category.
This product has one of the lowest Maintenance & Calibration costs when compared to others within its category or with products of alternative technologies.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in special materials, such as: Hastelloy C, Monel, Titanium, Tantalium, etc.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

FEX-220

VENTURI TUBE

Machined construction (1" to 8") or Rolled (8" to 48")

Very low pressure loss. Designed according to ISO or SFMEH Standards.

Add this product to the Inquiry List.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in special materials, such as: Hastelloy C, Monel, Titanium, Tantalium, etc.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
All or parts of the primary unit ("wet" parts) of this instrument are available with special anti-corrosive linings in engineering polymers such as:  PTFE, PVDF (Kynar), PFA, ETFE (Tefzel), ECTFE (Halar) or similar.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

FEX-230

INTEGRAL ORIFICE ASSEMBLY

Suitable to measure very low flow rates.

Typically with threaded connection 3/4" or 1" (NPT or BSP)

Add this product to the Inquiry List.
This product has one of the lowest Maintenance & Calibration costs when compared to others within its category or with products of alternative technologies.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in special materials, such as: Hastelloy C, Monel, Titanium, Tantalium, etc.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

FEX-240

FLOW NOZZLE

Manufactured according to ISA-1932 or ASME. Nominal sizes between 2" and 24".

Ideal solution for Steam. (Saturated, Wet or Super-Heated).

Add this product to the Inquiry List.
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is very convenient to measure wet or dry Steam. Including super-heated steam.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

FEX-250

WEDGE FLOW ELEMENT & TRANSMITTER

Nominal Sizes between 2" and 24".

Convenient solution for Biphasic Flow or for fluids with sediments.

Add this product to the Inquiry List.
This product has one of the lowest Maintenance & Calibration costs when compared to others within its category or with products of alternative technologies.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

FEX-270

CONVENTIONAL PITOT TUBE

Typical insertion flowmeter. Nominal sizes between 1" and 48".

Optionally available with high gain factor.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

FEX-280

AVERAGING PITOT TUBE

Ideal solution for large pipes. Sizes between 2" and 48"

Very low pressure loss. Good accuracy level.

Add this product to the Inquiry List.
This product has an intermediate total pruchase price when compared with others within its category.
This product has one of the lowest total Cost of Ownership within its category. Including costs such as: Purchase, Installation, Maintenance, Operation and Calibration.
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

ILVA

VARIABLE AREA FLOW ELEMENT

Very wide rangeability. Ideal solution for steam.

Nominal sizes between 2" and 8".

Add this product to the Inquiry List.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.