EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Electrochemical Instrumentation

 

LHI-xx

pH / ORP / DISSOLVED OXYGEN TRANSMITTER

With a galvanically isolated 4...20 mA output. Very simple calibration routine. With temperature compensation.

Special construction for corrosive and humid environments.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
Instrument or equipment available with Environmental (Ingress) Protection IP-65 or higher (Equivalent to NEMA-4X). This degree of protection is normally recommended for outdoor service.
This instrument is available with a combination of construction materials (for the primary and/or enclosure) that make it suitable for service or operation in environments with corrosive compundes, such as wet Cl2, HCl, NaOCl, etc.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
This instrument has Galvanic Isolation (typically 1500 VAC) between the input and output circuits (or beteween the I/O circuits and the power supply, if the last is independent)
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Download the general catalog of this product line.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

M-10

GENERAL PURPOSE pH SENSOR (1/2")

Totally built in Ryton + PTFE. Measurement range: 0 to 14 pH. Service temperatures up to 80°C and service pressures to 6.9 bar.

Optionally is available for service temperatures up to 110 °C.

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
This product has one of the lowest total purchase prices, when compared with others within its category.
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

M-11

GENERAL PURPOSE pH SENSOR (3/4")

Like the above, but with 3/4" NPT threaded connection and service pressures up to 10.3 bar.

Add this product to the Inquiry List.
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

M-12

SELFCLEANING pH SENSOR (3/4")

As above, but whit a flat-concave sensing surface that prevents sediment built-up.

Add this product to the Inquiry List.
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
This instrument is suitable to measure all kind of waste water. Including raw or partially filtered sewage.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

M-21

EXTENDED LENGTH pH SENSOR (3/4")

Same as the M11 pH sensor, but with additional extension.

Add this product to the Inquiry List.
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
This instrument is suitable to measure all kind of waste water. Including raw or partially filtered sewage.
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

TruTrack-P

pH DATA LOGGER

Combined pH and temperature datalogger with 16 bit resolution. Can stre up to 500.000 readings.

Data is downloaded using the OnmiLog software, through a standard USB port.

Add this product to the Inquiry List.
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.