EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Hydrostatic Level Transmitters

 

F-FKE

ADVANCED HYDROSTATIC LEVEL TRANSMITTER

Works in differential pressure mode. For tanks with a height up to 50 m.

Connection to the tank through flanges from 1 1/2" to 4".

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is available with Safety Integrity Level Certification. Typically it will be SIL-2 or higher.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

F-FXW.

HART PROTOCOL HANDHELD COMMUNICATOR

Allows to access remotely all HART protocol transmitters.

Available with Intrinsic Safety Certification and with Printer.

Add this product to the Inquiry List.
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Instrument available with direct output for a local printer. Typically this interface is RS-232C, RS-485 or USB. Normally it is used to print tickets or other short reports.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

TPX-770-B

FLANGED HYDROSTATIC LEVEL TRANSMITTER

For tanks open to the atmosphere. Flanged connection from 1" to 4".

Wide variety of materials and filling fluids.

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
All or parts of the primary unit ("wet" parts) of this instrument are available with special anti-corrosive linings in engineering polymers such as:  PTFE, PVDF (Kynar), PFA, ETFE (Tefzel), ECTFE (Halar) or similar.
This transmitter is available with a wide variety of hydraulic filling fluids, such as: Silicon Oil, Fluorinated Oil (Fluorolube, for Oxygen, Cl2 or F2 service) and Food Grade Esters (Neobee, FDA approved).
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TPX-770-H

"HYDROFLEX" TOP MOUNTING HYDROSTATIC LEVEL TRANSMITTER

Top mounting solution. Works in differential pressure mode.

Fully welded construction. Only AISI-316 SS in contact with the process liquid.

Add this product to the Inquiry List.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment with no moving parts.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TPX-770-I

SUBMERSIBLE LEVEL TRANSMITTER

Ideal to measure in lakes, rivers or underground tanks.

Add this product to the Inquiry List.
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment available with Environmental (Ingress) Protection IP-68 (Equivalent to NEMA-6P). Allows full inmersion for indefinite time.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TPX-770-S

SANITARY HYDROSTATIC LEVEL TRANSMITTER

With Tri-Clamp or Danish, SMS or DIN-11851 unions.

Special versions for high temperature.

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable for sterile sanitary processes with "Sterilize in Place" procedures. This typically means service at T >= 120 °C for a minimum time of 30 minutes and in direct contact with steam or other chemicals.
This transmitter is available with a wide variety of hydraulic filling fluids, such as: Silicon Oil, Fluorinated Oil (Fluorolube, for Oxygen, Cl2 or F2 service) and Food Grade Esters (Neobee, FDA approved).
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TPX-770-E

HYDROSTATIC LEVEL TRANSMITTER FOR SANITARY / ASCEPTIC SERVICE.

Same as above, but with extended diaphragm to assure perfect flush mounting.

Add this product to the Inquiry List.
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable for sterile sanitary processes with "Sterilize in Place" procedures. This typically means service at T >= 120 °C for a minimum time of 30 minutes and in direct contact with steam or other chemicals.
Besides the classic enclosures made of Aluminum, this Instrument is available with the electronics enclosure made of special materials, such as: Stainless Steel, Sanitary Plastics (FDA approved) or other.
This transmitter is available with a wide variety of hydraulic filling fluids, such as: Silicon Oil, Fluorinated Oil (Fluorolube, for Oxygen, Cl2 or F2 service) and Food Grade Esters (Neobee, FDA approved).
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TPX-770-DV

DIFFERENTIAL PRESSURE ASSEMBLY FOR LEVEL MEASUREMENT

Special system for tanks in the food or beverage industry.

Electronic solution that works like a "virtual differential transmitter".

Add this product to the Inquiry List.
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable for sterile sanitary processes with "Sterilize in Place" procedures. This typically means service at T >= 120 °C for a minimum time of 30 minutes and in direct contact with steam or other chemicals.
All or parts of the primary unit ("wet" parts) of this instrument are available with special anti-corrosive linings in engineering polymers such as:  PTFE, PVDF (Kynar), PFA, ETFE (Tefzel), ECTFE (Halar) or similar.
Besides the classic enclosures made of Aluminum, this Instrument is available with the electronics enclosure made of special materials, such as: Stainless Steel, Sanitary Plastics (FDA approved) or other.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.