EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Mass Flowmeters for Gases

 

A-GFM

MINI MASS FLOWMETER FOR GASES

Can measure from as low as 1 cm3/min to 1000 lts/min. Suitable for all gases.

Maximum service pressure to 70 bar. Typical accuracy.: 1% FS.

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-GFC

MINI MASS FLOW CONTROLLER FOR GASES

Same as above, but includes a flow control valve.

It has a special input for the Set Point of the control loop.

Add this product to the Inquiry List.
This instrument, equipment or option is among the most popular within its category.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This device is available with analog control or set-point inputs. These inputs could be either 4...20 mA current or 0...5 or 0...10 VDC voltage.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-TIO

LOCAL DISPLAY & DATA INTERFACE

Instant Flow & Accumulated Volume reading with engineering units.

Works as an interface to data acquisition systems.

Add this product to the Inquiry List.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-DFC

DIGITAL MASS FLOW CONTROLLER FOR GASES

Allows upto 10 different calibration curves.

Three different models cover the range from 10 cm3/min to 100 lts/min.

Add this product to the Inquiry List.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
This analyzer is available for the determination of multiple gases such as: CO, CO2, CH4, SH2, O2, etc
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-DFM

MULTI-PARAMETER MASS FLOWMETER FOR GASES

Measures at the same time: Flow, Volume, Pressure and Temperature.

Three nominal sizes cover the range between 10 cm3/min and 100 lts/min.

Add this product to the Inquiry List.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
This instrument is Multi-Variable or Multi-Parametric. This means that it can measure, transmit and/or indicate more than one parameter. Usually it will have multiple outputs or digital communication protocols.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-XFM

MINI ADVANCED MASS FLOWMETER FOR GASES

Can handle upto 10 different calibration curves.

Three nominal sizes cover the range from 10 cm3/min to 100 lts/min.

Add this product to the Inquiry List.
This instrument is one of the more convenient solutions within its category, balancing technical & economical factors.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
This analyzer is available for the determination of multiple gases such as: CO, CO2, CH4, SH2, O2, etc
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

K-454-FTB

INSERTION MASS FLOW TRANSMITTER FOR GASES

Ideal for large pipes or ducts: 2" to 120".

Can operate upto 500 °C and a pressure of 20 bar.

Add this product to the Inquiry List.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Insertion instrument suitable to be mounted in the process piping (with no service interruptions) by Hot Tap procedures.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the technical Data Sheet of this product.
 

K-Bar

MULTI-POINT MASS FLOW SENSOR FOR GASES

Ideal to measure exhaust gases in large ducts or stacks.

Can operate upto 500 °C. Meets EPA 40 CFR 75 standards.

Add this product to the Inquiry List.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Download the technical Data Sheet of this product.
 

K-Adam

MASS FLOW COMPUTER FOR GASES

To be used with K-Bar Sensors.

Can centralize upto 16 measurement points with 22 sensors.

Add this product to the Inquiry List.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

K-504-FTB

IN-LINE MASS FLOW TRANSMITTER FOR GASES.

Four nominal sizes in the range of 1/2" to 4".

Can operate with a pressure of up to 20 bar and service temperatures ranging from -40 to + 125 °C.

Add this product to the Inquiry List.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

CTV-310

MASS FLOWMETER FOR VENTILATION DUCTS

Operates in ranges from 0...1 m/sec to 0...30 m/sec.

Measures both the air velocity and flowrate.

Add this product to the Inquiry List.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.