EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

HVAC & Industrial Refrigeration

 

CP-300

HVAC DIFFERENTIAL PRESSURE TRANSMITTER

Measurement ranges between 1 and 1000 mm water column. Typical accuracy 0.5% FS.

With multi-parametric local LCD.

Add this product to the Inquiry List.
Differential Pressure Transmitters
This product has one of the lowest total purchase prices, when compared with others within its category.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

FEX-270

CONVENTIONAL PITOT TUBE

Typical insertion flowmeter. Nominal sizes between 1" and 48".

Optionally available with high gain factor.

Add this product to the Inquiry List.
Differential Pressure Flowmeters
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

CTV-310

MASS FLOWMETER FOR VENTILATION DUCTS

Operates in ranges from 0...1 m/sec to 0...30 m/sec.

Measures both the air velocity and flowrate.

Add this product to the Inquiry List.
Mass Flowmeters for Gases
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the technical Data Sheet of this product.
 

K-244x

INDUSTRIAL THERMAL ANEMOMETER

Ideal for HVAC ducts. Works at high air temperatures.

Measures from 0 to 60 m/Sec, with temperatures up to -40 ... +200 °C.

Add this product to the Inquiry List.
Portable Flowmeters
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

VT-200

GENERAL PURPOSE THERMO-ANEMOMETER

Available with thermal or rotating vane probe.

Works in a range from 0.15 to 35 m/sec.

Add this product to the Inquiry List.
Portable Flowmeters
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

VT-Cone

INTEGRATING CONE FOR VENTILATION DUCTS

Suitable to measure with high accuracy air flow in ventilation diffusers.

Add this product to the Inquiry List.
Portable Flowmeters
 

LIX-30-C/D

MAGNETIC LEVEL INDICATOR + SWITCH + TRANSMITTER

This instrument is suitable to measure level in extreme conditions: pressures to 150 bar, temperatures to 400 °C and liquid densities from 0.48 gr/cm3.

Large selection of constructive options and multiple indication units (LEDs, Magnetic Follower, Rolling Flags)

Add this product to the Inquiry List.
By-Pass Chamber Level Indicators
This instrument, equipment or option is among the most popular within its category.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is NOT affected by the density of the liquid being measured.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

TTX-380-A

STANDARD HEAD MOUNTED TEMPERATURE TRANSMITTER

USB programmable. RTD (Pt-100) inputs. All ranges can be configured by the user.

Add this product to the Inquiry List.
Temperature Transmitters
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument, equipment or option is among the most popular within its category.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is only available with RTD (Pt-100) input.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
This instrument is fitted with an USB serial communications port. According to the different situations, this interface can be used for configuration (a special software may be required) or data download.
Download the technical Data Sheet of this product.
 

TH-300

HVAC HUMIDITY TRANSMITTER

Combined relative humidity & temperature transmitter. With local multi-parameter LCD.

The enclosure is suitable for applications in the food or pharma industries.

Add this product to the Inquiry List.
Humidity Transmitters
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the technical Data Sheet of this product.
 

KH-350

HUMIDITY INDICATOR & DATA LOGGER

Combined relative humidity and ambient temperature indicator and data logger.

Intended for the meat processing, food and pharmaceutical industries.

Add this product to the Inquiry List.
Humidity Transmitters
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Download the technical Data Sheet of this product.
 

LPN-HD

DUCT MOUNTED HUMIDITY TRANSMITTER

Employs a revolutionary high stability digital sensor. Very fast: takes less than 4 sec to go from 0 to 100% RH.

Combined humidity transmitter + duct temperature transmitter. Double independent 4...20 mA output.

Add this product to the Inquiry List.
Humidity Transmitters
This product has one of the lowest total purchase prices, when compared with others within its category.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Download the general catalog of this product line.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

LPN-HW

WALL MUNTED HUMIDITY TRANSMITTER

Same as above, but for wall mounting.

Add this product to the Inquiry List.
Humidity Transmitters
This product has one of the lowest total purchase prices, when compared with others within its category.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Download the general catalog of this product line.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.