LIX-30-C/DMAGNETIC LEVEL INDICATOR + SWITCH + TRANSMITTERThis instrument is suitable to measure level in extreme conditions: pressures to 150 bar, temperatures to 400 °C and liquid densities from 0.48 gr/cm3.Large selection of constructive options and multiple indication units (LEDs, Magnetic Follower, Rolling Flags)Excellent solution for level measurement in boiler drums.By-Pass Chamber Level Indicators
|
|||
Ex-Delta-FSTANDARD VORTEX FLOWMETERTen different sizes between 1/2" and 12". Pressures up to 50 bar. Service temperature up to 460 °C.Ideal solution for steam and gases (including Natural Gas).Vortex & Target Flowmeters
|
|||
Ex-Delta-IINSERTION VORTEX FLOW METERIdeal for large pipes: 8" through 80". Temperatures up to 300 °C.High sensitivity: as low as 0.6 m/s in water.Suitable for the measurement of steam in large pipes.Vortex & Target Flowmeters
|
|||
FEX-240FLOW NOZZLEManufactured according to ISA-1932 or ASME. Nominal sizes between 2" and 24".Ideal solution for Steam. (Saturated, Wet or Super-Heated).Differential Pressure Flowmeters
|
|||
ILVAVARIABLE AREA FLOW ELEMENTVery wide rangeability. Ideal solution for steam.Nominal sizes between 2" and 8".Differential Pressure Flowmeters
|
|||
FloPet-EGCOMPACT OVAL GEAR FLOWMETERIdeal for fuels. Size range: 3/4" to 2". (5 to 24000 lts/hr)Typical accuracy: 0.30% of reading. Affordable.Convenient for the measurement of heavy fuels like Fuel-Oil and others.Positive Displacement Flowmeters
|
|||
K-454-FTBINSERTION MASS FLOW TRANSMITTER FOR GASESIdeal for large pipes or ducts: 2" to 120".Can operate upto 500 °C and a pressure of 20 bar.Convenient for the measurement of combustion air in large ducts.Mass Flowmeters for Gases
|
|||
K-BarMULTI-POINT MASS FLOW SENSOR FOR GASESIdeal to measure exhaust gases in large ducts or stacks.Can operate upto 500 °C. Meets EPA 40 CFR 75 standards.Specially designed for the measurement of flue gases in large smoke stacks.Mass Flowmeters for Gases
|
|||
TEX-102-PTUBE SKIN TEMPERATURE SENSORSpecially designed to be used in Boilers, Petrochemical Furnaces, etc.With type "K" thermocouples. Multiple mounting options.Temperature Sensors + Thermowells
|
|||
F-ZKMOXYGEN CONCENTRATION TRANSMITTERUses the Zirconia technology. Specially designed for combustion control applications.Measurement ranges between 0...2% and 0...50% of oxygen.Gas Analyzers
|
|||
F-ZRENDIR MULTIGAS ANALYZERInfra-red technology. For combustion and environmental control.Simultaneous and continuous measurement of: NOx, SO2, CO, CO2, CH4 and O2.Gas Analyzers
|
|||
F-ZSSSMOKE STACK GAS LASER ANALIZERDirect insertion instrument. Laser technology. Suitable for smoke stacks with diameters ranging from 0.5 to 10 m.Simultaneous and continuous measurement of NH3, HCl, H2O, CO, CO2 and CH4.Gas Analyzers
|
|||
STrol-2PANEL MOUNTED MASS FLOW COMPUTERFor Gases, Steam and Liquids.Computes the compensation according to the process pressure and temperature.For the calculation of energy transfer in heat exchangers and thermal equipment.Indicators + Totalizers + Computers + Batchers
|
|||
F-PXHADVANCED PROCESS CONTROLLERFully configurable (Input, range, control mode, etc). With advanced mathematical functions for linearization, totalization and computation.With calculation blocks to solve complex control strategies.Ideal for advanced applications in combustion control.Process Controllers
|
|||