EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Food / Beverage / Dairy / Agro-Industry

 

TPX-770-DV

DIFFERENTIAL PRESSURE ASSEMBLY FOR LEVEL MEASUREMENT

Special system for tanks in the food or beverage industry.

Electronic solution that works like a "virtual differential transmitter".

Add this product to the Inquiry List.
Hydrostatic Level Transmitters
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable for sterile sanitary processes with "Sterilize in Place" procedures. This typically means service at T >= 120 °C for a minimum time of 30 minutes and in direct contact with steam or other chemicals.
All or parts of the primary unit ("wet" parts) of this instrument are available with special anti-corrosive linings in engineering polymers such as:  PTFE, PVDF (Kynar), PFA, ETFE (Tefzel), ECTFE (Halar) or similar.
Besides the classic enclosures made of Aluminum, this Instrument is available with the electronics enclosure made of special materials, such as: Stainless Steel, Sanitary Plastics (FDA approved) or other.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Download the technical Data Sheet of this product.
 

G-SLT5.

ULTRASONIC LEVEL TRANSMITTER

Typical accuracy: 0.25% FS. Measurement ranges between 10 and 30 m.

The instrument has transmission (4...20 mA) and control (relay contacts) outputs.

Add this product to the Inquiry List.
UltraSonic & Radar Level Transmitters
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
The sensing device or active parts of this instrument have direct no contact with the process fluid.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

F-EE400

ELECTROMECHANICAL LEVEL TRANSMITTER

The best available solution for mining, cement and agro-industries. It is NOT affected by dust.

Standard range up to 30 m, and optionally to 40 m. Typical resolution: 10 mm/pulse.

Add this product to the Inquiry List.
Level Transmitters & Switches for Solids
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

F-SE111

ROTARY PADDLE LEVEL SWITCH FOR SOLIDS

The most classic and reliable solution for solids detection! More than 15 paddle models are available to solve any application.

Operation temperature range up to -20 ... +200°C.

Add this product to the Inquiry List.
Level Transmitters & Switches for Solids
This instrument, equipment or option is among the most popular within its category.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Download the technical Data Sheet of this product.
 

F-SC3400

TUNING FORK LEVEL SWITCH

Suitable for liquids and solids. Working temperatures up to -40 ... +150°C, pressures to 40 bar.

There are available probe extensions up to 3 m long.

Add this product to the Inquiry List.
Level Switches
Instrument or equipment with no moving parts.
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

A-GFC

MINI MASS FLOW CONTROLLER FOR GASES

Same as above, but includes a flow control valve.

It has a special input for the Set Point of the control loop.

Suitable for the measurement of "foaming" gases in the icecream and sweets industries.

Add this product to the Inquiry List.
Mass Flowmeters for Gases
This instrument, equipment or option is among the most popular within its category.
This product has one of the lowest total purchase prices, when compared with others within its category.
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This device is available with analog control or set-point inputs. These inputs could be either 4...20 mA current or 0...5 or 0...10 VDC voltage.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

KH-350

HUMIDITY INDICATOR & DATA LOGGER

Combined relative humidity and ambient temperature indicator and data logger.

Intended for the meat processing, food and pharmaceutical industries.

Add this product to the Inquiry List.
Humidity Transmitters
This instrument get its electric power from a Lithium battery. The battery's life span can typically go from 3 to 10 years. Optionally, It may also have an external power supply.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Download the technical Data Sheet of this product.
 

K-KLG

DATA LOGGING SOFTWARE

For data download from all the "K" series products. Data handling procedures according to the 21 CFR Part 11 standard.

Designed with a multiple document interface. Works with the USB port.

Add this product to the Inquiry List.
Solid State Data Loggers
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

F-PHU

HIGH CAPACITY VIDEO-GRAPHIC RECORDER

Multi-Input and Multi-Range recorder. Up to 30 channels of continuous recording. Advanced mathematical functions and totalization.

Large and bright screen: 12" LCD TFT.

Add this product to the Inquiry List.
Paper & Video-Graphic Recorders
This instrument is available with Universal Input (RTDs, Thermocouples, mV, 4...20 mA, etc). This instrument is also multi-range.
This equipment is available with Ethernet output (RJ-45 connector)
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SR-90s

ADVANCED TEMPERATURE CONTROLLERS

Our Most Pouplar Controller !.. Incredible reliability level.

For alll temperature control applications with 4...20 mA, RTD or thermocouple input.

Add this product to the Inquiry List.
Temperature Controllers
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument, equipment or option is among the most popular within its category.
This instrument is available with Universal Input (RTDs, Thermocouples, mV, 4...20 mA, etc). This instrument is also multi-range.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This controller is available with PID (Proportional-Integral-Derivative) continuous control mode. It is fully configurable and typically includes expert auto-tuning algorithms. (Can be configured to operate in On-Off control mode).
Controller available with digital output compatible with external Solid State Relays (SSR)
Instrument available with control (and/or alarm) outputs by means of relay contacts free of potential. Typically these are fully configurable inverting contacts (NO + NC - SPDT).
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SR-94

STANDARD PROCESS CONTROLLER

The Classic Controller for All Continuous Processes !

Multi-Input, Multi-Range and Multi-Control Mode. Fully configurable.

Add this product to the Inquiry List.
Process Controllers
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument, equipment or option is among the most popular within its category.
This instrument is available with Universal Input (RTDs, Thermocouples, mV, 4...20 mA, etc). This instrument is also multi-range.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This controller is available with PID (Proportional-Integral-Derivative) continuous control mode. It is fully configurable and typically includes expert auto-tuning algorithms. (Can be configured to operate in On-Off control mode).
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
This controller is available with 4 ... 20 mA control output. This signal is ideal to interface I/P transducers or any other modulating device (or valve) used as final control element.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

ATE-300

CLEAN ROOM DIGITAL INDICATOR

Multi-channel indicator with capacity for up to 3 measurements (ie.: Pressure, Temperature and Humidity) with the corresponding engineering units.

Four digit, electro-luminscent display, with 4...20 mA or 0...10 VDC inputs.

Add this product to the Inquiry List.
Digital Panel Indicators
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

i-LED-CD

PROCESS ILLUMINATOR WITH INTEGRAL SANITARY OBSEVATION WINDOW

"All in one" complete assembbly: sanitary observation window + solid state crown illuminator.

For sanitary connections sized 6", 5" and 4". For ISO Clamps (Tri-Clamp) or unions SMS, DIN-11851 or Danish.

Add this product to the Inquiry List.
Process Observation. Illuminators & Sight Windows
Instrument or equipment available with Environmental (Ingress) Protection IP-65 or higher (Equivalent to NEMA-4X). This degree of protection is normally recommended for outdoor service.
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable for sterile sanitary processes with "Sterilize in Place" procedures. This typically means service at T >= 120 °C for a minimum time of 30 minutes and in direct contact with steam or other chemicals.
Download the technical Data Sheet of this product.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.