EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Oil & Gas. Upstream / Downstream / Petrochemicals

 

LTS-1620-H

HEAVY DUTY MAGNETIC LEVEL TRANSMITTER

Probes with a length of up to 6 m. With self-cleaning high weight floats with diameters ranging from 75 to 150 mm.

Not affected by foam, waves or liquid density.

Widely used in the oil industry upstream applications, such as battery tanks, storage tanks, etc.

Add this product to the Inquiry List.
Magnetic Level Transmitters
This instrument, equipment or option is among the most popular within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is NOT affected by the density of the liquid being measured.
This level measurement instrument is NOT affected by foam build-up on the liquid surface.
The accuracy and reliability of this instrument is NOT affected by the composition, density or stratification of the gases or vapours above the liquid surface.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

LTS-1620-I

TOTAL & INTERFACE LEVEL TRANSMITTER

Measures both the Total Level and the Interface Level (water-hydrocarbon)

Has two independant transmission outputs. (2 x 4...20 mA + HART)

Typically used for the measurement of the Crude Oil - Water interface in cutting tanks, separator tanks and Free-Water separators.

Add this product to the Inquiry List.
Magnetic Level Transmitters
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is NOT affected by the density of the liquid being measured.
This level measurement instrument is NOT affected by foam build-up on the liquid surface.
The accuracy and reliability of this instrument is NOT affected by the composition, density or stratification of the gases or vapours above the liquid surface.
This instrument is Multi-Variable or Multi-Parametric. This means that it can measure, transmit and/or indicate more than one parameter. Usually it will have multiple outputs or digital communication protocols.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

LTS-1620-R

REDUNDANT MAGNETIC LEVEL TRANSMITTER

This instrument has full redundant electronic circuits.

Has two independant transmission outputs. (2 x 4...20 mA + HART)

Ideal for applications with high safety requirements.

Add this product to the Inquiry List.
Magnetic Level Transmitters
This product is new and has been launched into the market or totally revamped less than one year ago.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument available with some or all of its functions operating in a redundant mode. Depending on each case, this may mean that the instrument has double (or even triple): sensing unit, signal processing unit, transmission output or  control functions.
This instrument is NOT affected by the density of the liquid being measured.
This level measurement instrument is NOT affected by foam build-up on the liquid surface.
The accuracy and reliability of this instrument is NOT affected by the composition, density or stratification of the gases or vapours above the liquid surface.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

TPX-770-H

"HYDROFLEX" TOP MOUNTING HYDROSTATIC LEVEL TRANSMITTER

Top mounting solution. Works in differential pressure mode.

Fully welded construction. Only AISI-316 SS in contact with the process liquid.

Specially suited for tanks 6 to 25 m high.

Add this product to the Inquiry List.
Hydrostatic Level Transmitters
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment with no moving parts.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

LIX-30-C/D

MAGNETIC LEVEL INDICATOR + SWITCH + TRANSMITTER

This instrument is suitable to measure level in extreme conditions: pressures to 150 bar, temperatures to 400 °C and liquid densities from 0.48 gr/cm3.

Large selection of constructive options and multiple indication units (LEDs, Magnetic Follower, Rolling Flags)

Normally used for the level control in Gas-Gasoline or Gas-Crude Oil separators.

Also suitable to measure hydrocarbon-water interface, for example in Free-Water separators.

Add this product to the Inquiry List.
By-Pass Chamber Level Indicators
This instrument, equipment or option is among the most popular within its category.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is NOT affected by the density of the liquid being measured.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

LIX-30-UGS

MAGNETIC LEVEL INDICATOR. Underground Storage Tank Version.

Version suitable for mounting in underground storage tanks or on the top of standard tanks.

Ideal for light product storage tanks and separation pools.

Add this product to the Inquiry List.
By-Pass Chamber Level Indicators
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

MRG-10

ANTENNA TYPE RADAR LEVEL TRANSMITTER

Works at 5.8 GHz. Four different antenna models to cover ranges up to 20 m.

Suitable for process applications or storage tanks.

Add this product to the Inquiry List.
UltraSonic & Radar Level Transmitters
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
The sensing device or active parts of this instrument have direct no contact with the process fluid.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

LSV-1620

VERTICAL FLOAT LEVEL SWITCH

Up to 6 m probes. Up to eight control and/or alarm points. Redundant solutions.

Many different construction materials and large selection of process connections (Threaded, Flanged, Sanitary, etc.)

Specially convenient as "Over-Filling" alarm.

Add this product to the Inquiry List.
Level Switches
This instrument, equipment or option is among the most popular within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument available with some or all of its functions operating in a redundant mode. Depending on each case, this may mean that the instrument has double (or even triple): sensing unit, signal processing unit, transmission output or  control functions.
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
Download the technical Data Sheet of this product.
 

M-3769

LEVEL SWITCH FOR DOUBLE WALL TANKS

Interstitial design with a thickness of only 9.5 mm. Made of engineering plastics.

Suitable to detect liquids in the free space between the two walls in underground storage tanks.

Add this product to the Inquiry List.
Level Switches
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in engineering plastics, such as:  PVC, CPVC, PP, PTFE, PVDF, PPS, etc.
Download the technical Data Sheet of this product.
 

F-FKC.

ADVANCED DIFFERENTIAL PRESSURE TRANSMITTER

Measurement ranges between 10 mmWC up to 200 bar diff. Accuracies to 0.04 %FS. Static pressures up to 420 bar.

Turn-down ratio up to 100:1. Available in multiple construction materials.

Add this product to the Inquiry List.
Differential Pressure Transmitters
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument, equipment or option is among the most popular within its category.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is available with Safety Integrity Level Certification. Typically it will be SIL-2 or higher.
The primary unit (in other words, the part "wet" by the process fluids) of this instrument is available with construction in special materials, such as: Hastelloy C, Monel, Titanium, Tantalium, etc.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

F-FKG

ADVANCED GAGE OR ABSOLUTE PRESSURE TRANSMITTER

Ranges between 0.01 and 500 bar. Accuracies up to 0.04 %FS. Turn-down ratio 100:1.

Available in multiple special materials

Add this product to the Inquiry List.
Gage & Absolute Pressure Transmitters
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument, equipment or option is among the most popular within its category.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is available with Safety Integrity Level Certification. Typically it will be SIL-2 or higher.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

FEX-250

WEDGE FLOW ELEMENT & TRANSMITTER

Nominal Sizes between 2" and 24".

Convenient solution for Biphasic Flow or for fluids with sediments.

Ideal to measure gross production (Crude Oil + Water with Nat Gas presence).

Add this product to the Inquiry List.
Differential Pressure Flowmeters
This product has one of the lowest Maintenance & Calibration costs when compared to others within its category or with products of alternative technologies.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
The Differential Pressure Elements are a classic and very popular flowmetering technology. In these devices the flow rate is proportional to the square root of the measured differential pressure. (Calculation performed by the transmitter).
Download the technical Data Sheet of this product.
 

Ex-Delta-F

STANDARD VORTEX FLOWMETER

Ten different sizes between 1/2" and 12". Pressures up to 50 bar. Service temperature up to 460 °C.

Ideal solution for steam and gases (including Natural Gas).

Solution suited to measure Natural Gas, Gasolines or Steam.

Add this product to the Inquiry List.
Vortex & Target Flowmeters
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment with no moving parts.
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

DuoSonics

HYBRID ULTRASONIC FLOWMETER. (Non-Contact)

Combines Transit Time with Doppler Effect. For pipes from 11/2" to 40".

Optionally plots the velocity profile inside the pipeline. Accuracy to 0.5%.

Very convenient solution to measure injection water in enhanced recovery applications.

Add this product to the Inquiry List.
Ultra-Sonic Flowmeters, Non-Contacting & In-Line
Ideal to measure clean liquids with low degree of aeration. This definition typically involves liquids with Turbidity <= 10 g/l and Gas Concentrations <= 3% per volume. (Note: Gas in Liquid will generate a positive error in volumetric flowmeters).
Ideal to measure dirty liquids or liquids with a high degree of aeration. This definition normally includes liquids with at least 75 ppm of solids or 75 ppm of gas bubbles. The minimum size of the solids or bubbles should be >= 100 uM.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This flow flowmeter is based in the Ultra-Sonic Transit Time (Time of Flight) principle. It is a high reliability technology. Suitable for relatively clean and low aereated liquids.
This flowmeter is based in a Doppler Effect Ultra-Sonic principle. Requires relatively dirty or aereated liquids. The particles or bubbles are the echo producers.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the general catalog of this product line.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

NGR-FM

TARGET FLOW METER

Ideal for high pressure gases or liquids.

Flanged bodies between 1/2" and 6". Insertion styles between 4" and 36".

Ideal for the measurement of well fracking fluids at very high pressures.

Add this product to the Inquiry List.
Vortex & Target Flowmeters
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

K-454-FTB

INSERTION MASS FLOW TRANSMITTER FOR GASES

Ideal for large pipes or ducts: 2" to 120".

Can operate upto 500 °C and a pressure of 20 bar.

Very convenient for the measurement of flare gas or natural gas in large ducts at low pressure.

Add this product to the Inquiry List.
Mass Flowmeters for Gases
This instrument is suitable to measure all kind of gases, provided they are compatible with the construction materials of the instrumennt.
This instrument is convenient, both from an economic and technical point of view, to measure in large pipes. Typically nominal sizes larger than 10". Consult the catalog or data-sheet in order to determine the maximum size available.
This flowmeter is based in a thermal technology. Depending on the specific models can be by heating the fluid (laminar flow primary  body) or by thermal dispersion.
Insertion instrument suitable to be mounted in the process piping (with no service interruptions) by Hot Tap procedures.
This flowmeter may include an additional 4...20 mA output to be assigned as Temperature Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the technical Data Sheet of this product.
 

TTX-380-B

INDUSTRIAL TEMPERATURE TRANSMITTER

Instrument with a bi-compartment enclosure. For demanding applications.

Universal input. Ranges and operative functions fully configurable by the user through the digital HART communications.

Add this product to the Inquiry List.
Temperature Transmitters
This product is new and has been launched into the market or totally revamped less than one year ago.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument has Galvanic Isolation (typically 1500 VAC) between the input and output circuits (or beteween the I/O circuits and the power supply, if the last is independent)
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TEX-102-P

TUBE SKIN TEMPERATURE SENSOR

Specially designed to be used in Boilers, Petrochemical Furnaces, etc.

With type "K" thermocouples. Multiple mounting options.

Suited for the measurement in fired heaters or cracking furnaces.

Add this product to the Inquiry List.
Temperature Sensors + Thermowells
This instrument is suitable to be used in high temperature processes, when compared to other solutions within its category.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

TEX-102-M

MULTIPOINT TEMPERATURE SENSOR

For the measurement of temperature profiles in process equipment such as chemical reactors and similar.

Are designed to meet the specifications of every application.

Ideal for large chemical reactors with limited access ports.

Add this product to the Inquiry List.
Temperature Sensors + Thermowells
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with some or all of its functions operating in a redundant mode. Depending on each case, this may mean that the instrument has double (or even triple): sensing unit, signal processing unit, transmission output or  control functions.
Download the technical Data Sheet of this product.
 

F-ZSU

MULTICOMPONENT GAS ANALYZER

Similar to models ZRE or ZPA, but with field mountable enclosure.

With sample conditioning system and reference gases assembly.

For the measurement of flue gas composition.

Add this product to the Inquiry List.
Gas Analyzers
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
This analyzer is available for the determination of multiple gases such as: CO, CO2, CH4, SH2, O2, etc
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the general catalog of this product line.
 

F-ZSS

SMOKE STACK GAS LASER ANALIZER

Direct insertion instrument. Laser technology. Suitable for smoke stacks with diameters ranging from 0.5 to 10 m.

Simultaneous and continuous measurement of NH3, HCl, H2O, CO, CO2 and CH4.

Add this product to the Inquiry List.
Gas Analyzers
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
This instrument is suitable to be used in high temperature processes, when compared to other solutions within its category.
This analyzer is available for the determination of multiple gases such as: CO, CO2, CH4, SH2, O2, etc
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Download the general catalog of this product line.
 

Copyright © 2012...2016 CONAR. Innovations in Process Instrumentation & Control.