EnglishEspañolPortuguese
Innovations in Process Instrumentation & Control.
Company Certified ISO-9001:2008
Inquiry List

Chemical & Pharmaceutical Industries.

 

Ex-Delta-F

STANDARD VORTEX FLOWMETER

Ten different sizes between 1/2" and 12". Pressures up to 50 bar. Service temperature up to 460 °C.

Ideal solution for steam and gases (including Natural Gas).

Add this product to the Inquiry List.
Vortex & Target Flowmeters
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Instrument or equipment with no moving parts.
This instrument is suitable to measure all kind of fluids. According to the specifications, they may operate with: Liquids (typically with low viscosity), Gases or Steam.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Ultra-OS

ADVANCED OVAL GEAR FLOWMETER

High accuracy: up to 0.20 %Reading. Suitable for liquids, even high viscosity.

Nominal sizes from 1/2" to 2" (0.2 to 44 m3/Hr). Service temperatures up to 260 °C.

Add this product to the Inquiry List.
Positive Displacement Flowmeters
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
This instrument is suitable to measure all kind of liquids, including those with high or very high viscosity. Depending on the specific cases, these viscosities could go from as low as 1 cPoise up to 100,000 cPoise or more.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
 

MAC-N

MINIATURE OVAL GEAR FLOWMETER

Special for very low liquid flows. Covered range: 0.5 to 500 lts/hr.

Connection thredaded 1/4". Pressures upto 550 bar.

Add this product to the Inquiry List.
Positive Displacement Flowmeters
This instrument is suitable to measure all kind of liquids, including those with high or very high viscosity. Depending on the specific cases, these viscosities could go from as low as 1 cPoise up to 100,000 cPoise or more.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the general catalog of this product line.
Download the general catalog of this product line.
Download the general catalog of this product line.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SP-T

STANDARD AXIAL TURBINE FLOWMETER

Nominal sizes ranging between 1/4" and 4". Typical accuracy: 0.5% of reading.

Very wide temperature application range: -250 to +530 °C.

Add this product to the Inquiry List.
Turbine Flowmeters, In-Line & Insertion
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Certified by several Weights & Measures legal bodies with the purpose to be used in commercial transactions. (Custody transfer applications)
This instrument is suitable to measure low viscosity liquids (tipically with <= 10 cPoise) and all kind of gases.
This instrument is ideal to measure Cryogenic Liquids, such as liquid Nitrogen (LN2, approx. -196 °C), liquid Oxygen (LOX, approx. -183°C), liquid Argon (LAR, approx. -186°C) or similar.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

A-Mass

ADVANCED MASS FLOW TRANSMITTERS

Three alternatives: "U", Semi-Straight and Straight tubes. Accuracy to 0.10% of reading.

Twelve sizes between 1/4" and 6". Flow ranges from 2 gr/min up to 372 ton/hr.

Add this product to the Inquiry List.
Coriolis Mass Flowmeters
This product is new and has been launched into the market or totally revamped less than one year ago.
Suitable for sanitary Clean in Place processes. This typically means service at T >= 80 °C and with fluids such as lean solutions of NaOH, HNO3, detergents and similar.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
This flowmeter may include an additional 4...20 mA output to be assigned as Density Transmitter.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

M-RE250

METAL TUBE VARIABLE AREA FLOWMETER

Available in six sizes between 1/2" and 6".

May operate between -80 up to +350 °C and with pressures to 400 bar.

Add this product to the Inquiry List.
Local Flow Indicators. Rotameters
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

Tubux

STANDARD VARIABLE AREA FLOWMETER

With flow tube in borosilicate glass.

Available between 1/4" and 2".

Add this product to the Inquiry List.
Local Flow Indicators. Rotameters
This instrument, equipment or option is among the most popular within its category.
This instrument is suitable to measure liquids (tipically with low viscosity) and all kind of gases.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

LIX-30-C/D

MAGNETIC LEVEL INDICATOR + SWITCH + TRANSMITTER

This instrument is suitable to measure level in extreme conditions: pressures to 150 bar, temperatures to 400 °C and liquid densities from 0.48 gr/cm3.

Large selection of constructive options and multiple indication units (LEDs, Magnetic Follower, Rolling Flags)

Add this product to the Inquiry List.
By-Pass Chamber Level Indicators
This instrument, equipment or option is among the most popular within its category.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
This instrument is NOT affected by the density of the liquid being measured.
Transmitter with independent circuits for the power supply (that typically can be 24 V, 110 V or 220 V) and the signal output, that normally is (0)4...20 mA, 0...5 VCD, 1...5VDC or 0...10 VDC.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

LTS-1620-G

GENERAL PURPOSE MAGNETIC LEVEL TRANSMITTER

Special execution for tanks with heights between 0.5 and 3.0 m.

Typically with process connections between 1" and 2".

Add this product to the Inquiry List.
Magnetic Level Transmitters
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This instrument is NOT affected by the density of the liquid being measured.
This level measurement instrument is NOT affected by foam build-up on the liquid surface.
The accuracy and reliability of this instrument is NOT affected by the composition, density or stratification of the gases or vapours above the liquid surface.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

TPX-770-B

FLANGED HYDROSTATIC LEVEL TRANSMITTER

For tanks open to the atmosphere. Flanged connection from 1" to 4".

Wide variety of materials and filling fluids.

Add this product to the Inquiry List.
Hydrostatic Level Transmitters
This instrument, equipment or option is among the most popular within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
All or parts of the primary unit ("wet" parts) of this instrument are available with special anti-corrosive linings in engineering polymers such as:  PTFE, PVDF (Kynar), PFA, ETFE (Tefzel), ECTFE (Halar) or similar.
This transmitter is available with a wide variety of hydraulic filling fluids, such as: Silicon Oil, Fluorinated Oil (Fluorolube, for Oxygen, Cl2 or F2 service) and Food Grade Esters (Neobee, FDA approved).
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

MRG-10

ANTENNA TYPE RADAR LEVEL TRANSMITTER

Works at 5.8 GHz. Four different antenna models to cover ranges up to 20 m.

Add this product to the Inquiry List.
UltraSonic & Radar Level Transmitters
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
The sensing device or active parts of this instrument have direct no contact with the process fluid.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

F-FKP

DIRECT MOUNT GAGE OR ABSOLUTE PRESSURE TRANSMITTER

Available in ranges between 0.1 and 100 bar. Turn-down ratio to 16:1. Accuracy up to 0.1 %FS.

Add this product to the Inquiry List.
Gage & Absolute Pressure Transmitters
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download a generic or specific approval certificate covering this company, product or service.
Download a generic or specific approval certificate covering this company, product or service.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

TPX-770-R

THREADED INDUSTRIAL PRESSURE TRANSMITTER

Ranges available between 0.1 and 200 bar g. Accuracy to 0.25 % FS.

Add this product to the Inquiry List.
Gage & Absolute Pressure Transmitters
This instrument, equipment or option is among the most popular within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
This transmitter is available with a wide variety of hydraulic filling fluids, such as: Silicon Oil, Fluorinated Oil (Fluorolube, for Oxygen, Cl2 or F2 service) and Food Grade Esters (Neobee, FDA approved).
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Instrument available with HART digital communications protocol over the 4...20 output signal. HART is a very convenient tool for the instrument remote re-calibration, re-configuration or diagnostics.
Download the technical Data Sheet of this product.
 

TPX-722-CP

FLUSH DIAPHRAGM COMPACT GAGE PRESSURE TRANSMITTER

"Ceram-Plus" version. Available in ranges from 1 to 10 bar g. Threaded connection 3/4" or 1".

Add this product to the Inquiry List.
Gage & Absolute Pressure Transmitters
This transmitter with flush diaphragm is ideal to handle sanitary, sticky, dirty or with possibility of polimerization fluids. It may also include an Diaprhagm Extension in order to minimize the deposition of foreign material in the process connection.
This transmitter has a 4...20 mA (or 4...20 mA + HART) output over a two wire circuit, with a nominal power supply of 24 VDC. (Typically the voltage supply is allowed to swing between 12 and 36 VDC).
Download the technical Data Sheet of this product.
 

TEX-102-M

MULTIPOINT TEMPERATURE SENSOR

For the measurement of temperature profiles in process equipment such as chemical reactors and similar.

Are designed to meet the specifications of every application.

Add this product to the Inquiry List.
Temperature Sensors + Thermowells
This instrument ranks at the top in Total Measurement Accuracy when compared to others within its category or with instruments of competitive technologies.
Instrument available with some or all of its functions operating in a redundant mode. Depending on each case, this may mean that the instrument has double (or even triple): sensing unit, signal processing unit, transmission output or  control functions.
Download the technical Data Sheet of this product.
 

STrol-1

BATCH CONTROLLER

Measures flowrate and accumulated volume (grand and partial totals).

Implements the "start-stop" function of the dosing sequence.

Add this product to the Inquiry List.
Indicators + Totalizers + Computers + Batchers
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
This instrument is available with direct digital pulse output. These puses typically can be used for volume or mass totalization.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
Instrument available with integrated digital data logger. Typically the memory is non-volatile and the data is downloaded using a special software package through a USB, RS-232 or wireless infrared interface.
Instrument available with direct output for a local printer. Typically this interface is RS-232C, RS-485 or USB. Normally it is used to print tickets or other short reports.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
Download the technical Data Sheet of this product.
 

LevelTrol

LEVEL COMPUTER

Can handle diverse tank geometries. Computes the density or temperature compensation.

Add this product to the Inquiry List.
Digital Indicators + Level Computers
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Instrument available with direct output for a local printer. Typically this interface is RS-232C, RS-485 or USB. Normally it is used to print tickets or other short reports.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

SR-94

STANDARD PROCESS CONTROLLER

The Classic Controller for All Continuous Processes !

Multi-Input, Multi-Range and Multi-Control Mode. Fully configurable.

Add this product to the Inquiry List.
Process Controllers
Typically this instrument is stocked and available for delivery within 24 Hrs after the Purchase Order is placed and accepted.
This instrument, equipment or option is among the most popular within its category.
This instrument is available with Universal Input (RTDs, Thermocouples, mV, 4...20 mA, etc). This instrument is also multi-range.
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This controller is available with PID (Proportional-Integral-Derivative) continuous control mode. It is fully configurable and typically includes expert auto-tuning algorithms. (Can be configured to operate in On-Off control mode).
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
This controller is available with 4 ... 20 mA control output. This signal is ideal to interface I/P transducers or any other modulating device (or valve) used as final control element.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

F-PXH

ADVANCED PROCESS CONTROLLER

Fully configurable (Input, range, control mode, etc). With advanced mathematical functions for linearization, totalization and computation.

With calculation blocks to solve complex control strategies.

Add this product to the Inquiry List.
Process Controllers
Instrument with transmission (or re-transmission) ouput signal in the range of 4 .... 20 mADC.
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This device is available with analog control or set-point inputs. These inputs could be either 4...20 mA current or 0...5 or 0...10 VDC voltage.
This controller is available with PID (Proportional-Integral-Derivative) continuous control mode. It is fully configurable and typically includes expert auto-tuning algorithms. (Can be configured to operate in On-Off control mode).
This controller available with Fuzzy Logic control algorithms.
This controller available with Fuzzy Logic control algorithms.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
This controller is available with 4 ... 20 mA control output. This signal is ideal to interface I/P transducers or any other modulating device (or valve) used as final control element.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

MG-562-S

LOOP POWERED FIELD DIGITAL INDICATOR. STAINLESS STEEL ENCLOSURE.

Back lit LCD with four digit capacity. Powered by the current loop (4...20 mA).

With engineering unit indication and addtional bar-graph. Stainless steel enclosure with optional integral cable glands.

Add this product to the Inquiry List.
Field Digital Indicators
This product is new and has been launched into the market or totally revamped less than one year ago.
This instrument, equipment or option is among the most popular within its category.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
This instrument is avaiblable with Intrinsic Safety Certification. Depending on the specific cases it could be Ex ia IIB+H2 T6 (ATEX, INTI or equivalent) and/or Class I, II, III; Div 1; Groups B, C, D, E, F, G (FM, CSA or equivalent)
Besides the classic enclosures made of Aluminum, this Instrument is available with the electronics enclosure made of special materials, such as: Stainless Steel, Sanitary Plastics (FDA approved) or other.
This instrument is HART transparent. This means that it can be inserted in a measurement loop without affecting the functionality or reliability of the HART communications.
Download the technical Data Sheet of this product.
 

ATE-300

CLEAN ROOM DIGITAL INDICATOR

Multi-channel indicator with capacity for up to 3 measurements (ie.: Pressure, Temperature and Humidity) with the corresponding engineering units.

Four digit, electro-luminscent display, with 4...20 mA or 0...10 VDC inputs.

Add this product to the Inquiry List.
Digital Panel Indicators
Instrument available with ModBus-RTU digital communication protocol over a RS-485 interface.
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the technical Data Sheet of this product.
 

F-PHU

HIGH CAPACITY VIDEO-GRAPHIC RECORDER

Multi-Input and Multi-Range recorder. Up to 30 channels of continuous recording. Advanced mathematical functions and totalization.

Large and bright screen: 12" LCD TFT.

Add this product to the Inquiry List.
Paper & Video-Graphic Recorders
This instrument is available with Universal Input (RTDs, Thermocouples, mV, 4...20 mA, etc). This instrument is also multi-range.
This equipment is available with Ethernet output (RJ-45 connector)
This instrument is available with auxiliary alarm and/or control outputs. Typically these are SPDT contacts, free of potential, that can be configured for High and/or Low conditions.
Download the general catalog of this product line.
Download the technical Data Sheet of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
Download an Instruction Manual (Installation anr/or operation and/or maintenance) of this product.
 

i-LED-CP

CIRCULAR CROWN TYPE PROCESS ILLUMINATOR FOR ANSI FLANGES

Illumination and observation through a single sight window.

For mounting in observation windows made with standard ANSI flanges, sizes 8", 6", 4" and 2". Great illumination capacity.

Add this product to the Inquiry List.
Process Observation. Illuminators & Sight Windows
This instrument, equipment or option is among the most popular within its category.
This instrument or equipment is suitable for heavy duty service. Under this definition we may include: extreme ambient temperatures, humid or dirty installation environments, etc.
Instrument available with Flameproof (Explosionproof) Certification. Depending on the circumstances, this certification could be Ex d IIB+H2 T6 (ATEX, INTI, or equivalent) and/or Class II, III; Div 1; Gropus B, C, D, E, F,G  (FM, CSA or equivalent)
Instrument or equipment available with Environmental (Ingress) Protection IP-65 or higher (Equivalent to NEMA-4X). This degree of protection is normally recommended for outdoor service.
Download the technical Data Sheet of this product.
 

i-WIN-FR

STANDARD PROCESS OBSERVATION WINDOW

Observation windows for ANSI flanges or sanitary connections manufactured with the "floating ring" technology.

For nominal sizes: 8", 6", 4", 3" and 2".

Add this product to the Inquiry List.
Process Observation. Illuminators & Sight Windows
Download the technical Data Sheet of this product.
 

i-WIN-FG

INTEGRAL PROCESS OBSERVATION WINDOW

Similar to the above, but made with the Fused Metal+Glass technology.

Exceptional surface finish and mechanical resistance. High Pressure vs Temperature performance.

Add this product to the Inquiry List.
Process Observation. Illuminators & Sight Windows
This instrument is suitable to be used in high temperature & high pressure processes. This definition is broad, but in general terms it may be understood as P>= 50 bar and T >= 300 °C
Instrument available with Sanitary Process Connections. Depending on the requirements these connections could be: a) ISO-2852 (TriClover, 3A) Clamp, b) Danish Union according to DS-722, c) Swedish Union as per SMS-1145, or d) DIN Union as per DIN-11851.
Download the technical Data Sheet of this product.
 

Copyright &copy; 2012...2016 CONAR. Innovations in Process Instrumentation & Control.